TSGL: Event viewer

[H Davis]

John,

Check this link. Sounds like your problem with a potential solution. It 
expands on your attempt with ipconfig /renew.

http://www.tek-tips.com/viewthread.cfm?qid=1240181&page=1

HTH

H Davis


jonpan wrote:
> Thanks, Alan. My router is T-Com Speedport W500V and has no settings for 
> number of connections. Lease time goes from 30 min to 2 weeks, but no 
> 'forever'. MAC addresses are unlimited. I can't bring myself to return to 
> factory defaults while everything is working - maybe later!
>
> John
>
> ----- Original Message ----- 
> From: "Alan Mitchell" <alan_mitchell at mindspring.com>
> To: "'Tech Support Guy Mailing List'" <list at tsgserver.com>
> Sent: Saturday, October 20, 2007 5:22 PM
> Subject: Re: TSGL: Event viewer
>
>
> Haven't seen these messages on my configuration, but might be able to offer
> some advice. Since the Router is performing the DHCP function, the router is
> where you need to investigate. Sign on to the router (preferably using the
> wired connection) and check to see if you've inadvertently set any
> restrictions on the number of connections permitted (normally the default is
> 50 for Linksys but may vary depending on your model), any restrictions on
> lease time (which should be set to "forever", sometimes with a ZERO time,
> sometimes with a specific value, depending on your model), or see if you've
> set it up to only permit certain MAC addresses to be recognized. While most
> of these settings normally apply to the wireless portion ONLY, I've seen
> some routers get confused and start applying them to all connections. If
> this is the case, you may need to do a hard reset and re-establish your
> router configuration to its factory defaults and then go back in and reset
> your password and WPA/WEP settings for the wireless connections.
>
> Alan
>
> -----Original Message-----
> From: list-bounces at tsgserver.com [mailto:list-bounces at tsgserver.com] On
> Behalf Of jonpan
> Sent: Saturday, October 20, 2007 10:32 AM
> To: ListTSG
> Subject: TSGL: Event viewer
>
> Hi all,
>
> Using a wireless router, XP Pro/2. Router connected to my PC per cable, to
> my wife's per wireless. All TCP/IP settings on automatic.
>
> Once per session on booting, Viewer/system gives me the message:
>
> IP address lease 192.168.x.xx for the Network Card with Network address
> ...........
> has been denied by DHCP Server 192.168.x.x (The DHCP Server sent a DHCPNACK
> Message)
>
> I've tried ipconfig /release followed by ipconfig /renew which changes the
> above IP address temporarily - changed back by the auto-settings, I assume.
>
> Everything works, so not of primary importance, but it would interest me to
> hear if others have the same message and if someone knows why.
>
> Cheers,
>
> John
> Od/G
>
>
> _______________________________________________
> Tech Support Guy Mailing List
> http://www.tsgserver.com/list/
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.488 / Virus Database: 269.15.3/1081 - Release Date: 10/19/2007
> 5:41 PM
>
>
>
> _______________________________________________
> Tech Support Guy Mailing List
> http://www.tsgserver.com/list/ 
>
>
> _______________________________________________
> Tech Support Guy Mailing List
> http://www.tsgserver.com/list/
>
>   

-- 
H Davis   hdavis1 at gmail.com