TSGL: Mobile phone - hope someone can help with this

[jonpan]

Link didn't work.

John
Od/G
----- Original Message ----- 
From: "Computerfee" <computer.fee at googlemail.com>
To: "TSGL" <List at tsgserver.com>
Sent: Friday, June 27, 2008 4:45 PM
Subject: TSGL: Mobile phone - hope someone can help with this


Hi there everybody,
My husband is trying at last to repair the old mobile phone of our son which 
is a Siemens SX1. We found online, the solution for the problems seems to be 
a cold solder joint of the Flash Memory on the printed circuit board which 
you have to re-do. Now the problem is our lack of knowledge where to find 
the point where it has to be done. The description of the repair is rather 
vague - wrap plastic-part of two plug-connections with aluminium foil, put 
some solder on the edge of the printed circuit board and heat it up with a 
hair drier until it gets liquid. Well, nice clear - the edge of the thing 
could be anywhere. here is a link to the photo of the printed circuit board 
in question it is part of a description for changing LED colours, so that's 
why these spots are marked - 
http://www.blue-backlight.de/de/umba...umb_sx1_11.jpg Maybe it is not on 
this side even but on the back of it, but I could not find anything else but 
the description above and the forum where I found it, seems to be quite old, 
as the mobile is quite old as well.

So I am just hoping anybody around does have an idea that could help us 
here.
Thanks a lot
Best wishes
Heidi



_______________________________________________
Tech Support Guy Mailing List
http://www.tsgserver.com/list/